Abstract
Multi-layered nanostructured Cu and Cu–CNx composites synthesized by plasma-enhanced chemical vapour deposition were applied in the clamping area of a milling tool to suppress regenerative tool chatter. Scanning electron microscopy analysis showed a multi-layered nanostructure with excellent conformality, i.e. coating is not only uniform on planar surfaces but also around corners of the substrate. Cu:CuCNx nanostructured multilayers with thicknesses of approximately 0.5:1.6μm were obtained. With a diameter of 20mm, the milling tool performed slotting processes at an overhang length of 120mm. Modal analysis showed that a coating, with a thickness of approximately 300μm, can add sufficient damping without losing stiffness of the tool, to increase the critical stability limit by 50% or 100% depending on cutting direction.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.