Abstract

The repeating of heating/cooling cycle (75 times) simulating the heat energy storage in magnesium nitrate hexahydrate confirmed supercooling of 27 K, and thus many non-isostructural nucleating agents were tested in concentration of 1 mass% in four charge/discharge cycles. From the whole group, four promising nucleating salts were subjected to detailed study with addition of 0.5, 1, and 2 mass% of nucleating salt. The results show that the addition of Mg(OH)2, BaO, MgO and Sr(OH)2 suppressed supercooling below 5 K during 50 melting/crystallization cycles. At the similar conditions (temperature range and repeating of heating and cooling), MNH and MNH with 0.5 mass% Mg(OH)2 or Sr(OH)2 underwent corrosion tests in aluminium alloy tubes to discover applicability of this material for the containers or capsules for heat storage. The long-term contact (>49 days) of aluminium alloy with melted heat storage material for 664 h provided information about suitability of alloy for storing of magnesium nitrate hexahydrate with nucleating agent.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.