Supersonic jet flow control using semi-circular corrugated tabs

Abstract

Purpose The purpose of this study is to increase the jet mixing effectiveness of Mach 1.6 axisymmetric jet using semi-circular corrugated triangular tabs (Tabs A, B and C), in which the locations of the semi-circular corrugations are varied along the leaned sides of the triangular tabs. Design/methodology/approach The tabs are fixed at the exit of the nozzle facing each other 180° apart. To quantify the jet mixing effectiveness of the semi-circular corrugated tabs, Pitot pressure measurements were carried out for the cases of over-expansion, marginally over-expansion and under-expansion levels of Mach 1.6 jet, along the jet centerline and the jet spread, along and normal to the tab axis. Findings The results exhibit that the semi-circular corrugated Tab A augments the jet mixing when compared to Tabs B and C. This impact in jet mixing is strongly due to the small-scale vortices shed from the tabs and the mixed effect of the corrugation locations and expansion ratio. The maximum percentage reduction in core length is about 73.6 per cent for the jet with semi-circular corrugated Tab A at NPR 5, whereas it is 71.4 and 67.1 per cent for Tabs B and C, respectively. Practical implications The reduction in core length of the jet with minimum thrust loss is obtained by controlling the jet used with semi-circular corrugated triangular tabs of equal blockage ratio 5.12 per cent with respect to the nozzle exit diameter. Originality/value The locations of the semi-circular corrugations varied systematically at the equally leaned sides of the triangular tab ensure the novelty of this study.