Superplasticity of fine-grained magnesium alloys for biomedical applications: A comprehensive review

Abstract

The superplastic behavior of medical magnesium alloys is reviewed in this overview article. Firstly, the basics of superplasticity and superplastic forming via grain boundary sliding (GBS) as the main deformation mechanism are discussed. Subsequently, the biomedical Mg alloys and their properties are tabulated. Afterwards, the superplasticity of biocompatible Mg-Al, Mg-Zn, Mg-Li, and Mg-RE (rare earth) alloys is critically discussed, where the influence of grain size, hot deformation temperature, and strain rate on the tensile ductility (elongation to failure) is assessed. Moreover, the thermomechanical processing routes (e.g. by dynamic recrystallization (DRX)) and severe plastic deformation (SPD) methods for grain refinement and superplasticity in each alloying system are introduced. The importance of thermal stability (thermostability) of the microstructure against the grain coarsening (grain growth) is emphasized, where the addition of alloying elements for the formation of thermally stable pinning particles and segregation of solutes at grain boundaries are found to be major controlling factors. It is revealed that superplasticity at very high temperatures can be achieved in the presence of stable rare-earth intermetallics. On the other hand, the high-strain-rate superplasticity and low-temperature superplasticity in Mg alloys with great potential for industrial applications are summarized. In this regard, it is shown that the ultrafine-grained (UFG) duplex Mg-Li alloys might show remarkable superplasticity at low temperatures. Finally, the future prospects and distinct research suggestions are summarized. Accordingly, this paper presents the opportunities that superplastic Mg alloys can offer for the biomedical industries.