Abstract
Superplastic forming process of Ti-4Al-3Mo-1V alloy was optimized via an integrated approach. Material characterization, flow behavior modelling, finite element simulation (FES), and superplastic forming (SPF) were the steps of the study. The as-processed sheets were characterized via uniaxial constant strain rate tests at 750-900 °C and 1×10-4-1×10-2 s-1, which considered the superplasticity ranges of this alloy. The flow behavior was modelled using hyperbolic sine law constitutive equation (CE) and the artificial neural network (ANN). The constructed models were assessed via the cross-validation technique, which declare better predictability of the CE model comparing to the ANN model. The stress-strain data was used to adjust the mechanical properties of studied alloy inside the FES program, DEFORM 2D/3D. In this step the optimized pressure-time dependence was computed for SPF. The FES results were verified by experimental SPF via lab machine. The Ti-4Al-3Mo-1V alloy was successfully formed by superplastic forming technique using the proposed integrated approach.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.