Abstract
Superplastic forming and diffusion bonding (SPF/DB) is a well-established process for the manufacture of components almost exclusively from Ti–6Al–4V sheet material. The SPF/DB with gas pressure control for honeycomb structure is investigated. The optimum parameters are as follows: bonding temperature, T = 1203 K; bonding pressure, P = 10 MPa; bonding time, t = 30 min. The effects of microstructure were carried out with the bonded samples. The microstructure shows an excellent bonding at the interfaces. The optimum parameters for the SPF/DB process are as follows: forming temperature, T = 1203 K; forming pressure, P = 0.6 MPa; forming time, t = 60 min. The distribution of thickness after SPF/DB was investigated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
