Abstract
Laboratory compaction is an important part of asphalt mix design. For the mix design process to be effective, laboratory compaction must adequately simulate field compaction. In this study mechanical properties measured with the Superpave® shear tester were used to evaluate field compaction and laboratory compaction. The field compaction consisted of three test sections with different compaction patterns. The laboratory compaction used the Superpave gyratory compactor with adjustments to several parameters. Results of this study indicate that current gyratory protocol produces specimens with significantly different mechanical properties than those of field cores produced with the same material and compacted to the same air voids. Results also show that adjustments to certain parameters of the gyratory can produce specimens that better simulate the mechanical properties of pavement cores.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Transportation Research Record: Journal of the Transportation Research Board
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
