Superlight rotating reflectors in space

Abstract

Listen

Translate article

There is a general possibility of creation in space of large controlled mirror reflectors for solar and electromagnetic radiation with specific mass order of 1 g m −2 or less. Such reflectors may be used in space energetics for concentration of solar energy for its further conversion into microwave beam and transmission to the Earth. They can also be used to illuminate the Earth surface in a dark period with reflected sunlight, to control the weather, for research work and some other purposes. Such reflector is a good solar sail. The control of its orientation and position in space is performed using solar energy and light pressure without spending fuel delivered from the Earth. Its form is maintained by centrifugal forces and light pressure. The film strength permits concentrators with radii of several kilometres and nearly flat reflectors for lighting applications with radii of hundreds of metres. Large series of identical reflectors can be built in space using superthin film tape at assembly station. For a year more than a hundred reflectors with a diameter of 600 m can be assembled at such a station. The assembly station can be placed at the height of 1000 km. The reflectors transfer to synchronous or other orbit is performed using their sail-likeness. For realization of such reflectors one should solve a very difficult problem of superthin film mass production as well as assembly technology problems. Careful study and experimental checks of their lifetime should be also made.