Superior transport behavior of gold nanoparticles/P3HT blends by tuning optical and structural properties

Abstract

Organic materials and blends have received a great deal of interests for application in large area, flexible, and low-cost organic/hybrid electronics. In this work the optical, structural and the electrical behaviors of a new active layer system composed by functionalized gold nanoparticles (AuNPs) and conjugated polymers, were investigated. For this purpose, gold nanoparticles with diameter of about 5 nm were chosen, coated with the bifunctional π-conjugated ligand (9,9-didodecyl-2,7-bis(acetylthio)fluorene, FL) for their high stability and easy dispersibility in organic solvents. The blends based on AuNPs and regioregular poly-3-hexylthiophene (P3HT) were prepared by adding an increasing percentage by weight of nanoparticles, i.e. from 10% to 90 wt%, in the P3HT polymeric matrix. The presence of nanoparticles was confirmed by UV-Vis spectroscopy, electron microscopy and X-ray diffraction techniques. The optical characterization of the composites demonstrated the possibility to tune the optical behavior of the P3HT by adding increasing percentages of AuNPs into the polymer matrix. Their inclusion results in a loss of P3HT crystallinity and in a simultaneous increase of the π-π interaction between the polythiophene chain and fluorene ligand. To better investigate the films, Grazing Incident X-ray Diffraction (GIXD) measurements were carried out and the blend containing 30 wt% of AuNPs in P3HT reveals an optimal condition, combining good structural order and interconnectivity in the polymer matrix. The electrical characterization of the AuNPs/P3HT blends reveals an improvement of the electrical conductivity in all the prepared blends, that show higher conductivity values compared to the pristine AuNPs and P3HT materials. The best performance is achieved adding 30 wt% of AuNPs to P3HT resulting in an enhancement of conductivity by about 350% compared to that of the pure polymer. This result could be of great interest for the realization of new conductive film composites to use in opto-electronic devices.