Abstract
In-house synthesized multiwall carbon nanotubes (MWCNTs) have been dispersed in acrylonitrile butadiene styrene (ABS) using a micro twin-screw extruder with back flow channel. The electrical and mechanical properties of MWCNTs in ABS with different wt% have been studied. Incorporation of only 3 wt. % MWCNTs in ABS leads to significant enhancement in the tensile strength (up to 69.4 MPa) which was equivalent to 29% increase over pure ABS. The effect of MWCNTs on the structural behaviour of ABS under tensile loading showed a ductile to brittle transition with increase concentration of MWCNTs. The results of enhanced mechanical properties were well supported by micro Raman spectroscopic and scanning electron microscopic studies. In addition to the mechanical properties, electrical conductivity of these composites increased from 10−12 to 10−5 Scm−1 showing an improvement of ∼7 orders of magnitude. Due to significant improvement in the electrical conductivity, EMI shielding effectiveness of the composites is achieved up to −39 dB for 10 wt. % loaded MWCNTs/ABS indicating the usefulness of this material for EMI shielding in the Ku-band. The mechanism of improvement in EMI shielding effectiveness is discussed by resolving their contribution in absorption and reflection loss. This material can be used as high-strength EMI shielding material.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have