Superior Enhancement in Mechanical Properties of Polyurethane‐Based Multifunctional GAP Partially Grafted with Fluorinated Polyether via Catalyst‐Free Click Reaction

Abstract

AbstractDifunctional glycidyl azide polymer (GAP) is an energetic binder promising for propellant formulations. The multifunctional fluorine‐containing GAP has been synthesized to enhance its mechanical properties. This work outlined multifunctional GAP partially grafted with 1,2,3‐triazole‐5‐(α‐hydroxyl)‐fluorinated polyether (GAP‐g‐3F) synthesized by thermal and catalyst‐free azide‐alkyne cycloaddition reaction, in which the azide groups were from GAP and electron‐deficient alkynes from β‐propargyl‐α‐hydroxyl poly (tri‐fluoropropane glycidyl ether) (PHP3F). PHP3F was synthesized via the typical cationic ring‐opening polymerization of 2‐((2,2,2‐trifluoroethoxy) methyl) oxirane and propargyl alcohol as the initiator. The chemical structures, molecular weight, and thermal properties were characterized by FTIR, NMR, GPC, DSC, and TGA, respectively. HNMR results showed that 8 % of total azide groups in GAP were grafted. GAP‐g‐3F had a slightly higher glass transition temperature than that of GAP. The results of TGA showed that GAP‐g‐3F had suitable thermal decomposition resistance up to 200 °C. The thermal properties, mechanical properties, cross‐linking network structures, and microstructures of the polyurethane networks cured with hexamethylene diisocyanate trimer as a crosslinking agent were determined and compared by TGA, universal tensile test, swelling measurement, and SEM, respectively. The initial decomposition temperature of GAP‐g‐3F‐based polyurethane networks (GAP‐g‐3F‐PU) was around 220 °C, thus meeting the requirements for propellants. In addition, GAP‐g‐3F‐PU exhibited superior mechanical properties, showing an almost twelvefold increase in tensile strength to 16.9 MPa compared with difunctional GAP‐PU with 1.4 MPa tensile strength. The results of the swelling measurement revealed that the GAP‐g‐3F‐PU sample showed a higher crosslinking density in comparison to the GAP‐PU sample. SEM results indicated that the multifunctional fluorine‐containing GAP could enhance compatibility between the soft and hard segments of polyurethanes, leading to a decrease in their separation degree. This finding showed that the synthesis of a multifunctional GAP partially grafted with fluorinated polyether via a triazole ring may be a promising solution to decrease the separation degree increase of PUs, thereby improving the mechanical properties.