Abstract
The low deposition rate of the high power impulse magnetron sputtering (HiPIMS) somewhat limits its commercial applications in thin film and coating industries. In this work, an effective way to improve the deposition rate of TiN film by superimposing the middle-frequency (MF) pulses during off-time of HiPIMS pulsing was discussed. Superimposition of HiPIMS and MF fabricated TiN films with relatively smooth surface. All samples were found to have a single phase TiN according to the chemical composition and crystallographic analyses. The highest film hardness of ~31GPa, elastic modulus of 313GPa, and a density of 5.35g/cm3 were obtained in the sample grown at a MF pulse duration of 150μs in each superimposed cycle. The higher the deposition rate was achieved with longer MF pulse duration. This superimposition technique successfully improved the power-normalized deposition rate from 4.5 to 17.2nm/kW·min without significantly declining the mechanical properties and adhesion quality of deposited films. The role of MF pulse duration and average MF power were further studied in this work. It can be concluded that the MF pulse duration played a more significant role and showed a dominant influence on the plasma characteristics and resulting properties of deposited TiN films.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
