Abstract
The resistance of the bearing is a significant factor affecting the performance of the ball-disk rotor gyroscope. The micro and nano combined surface with low surface energy material modifications can be hydrophobic. This can reduce the drag when the bearing is lubricated by deionized water. Laser ablation method is utilized to form micron-scaled structures on the surface of the stainless steel rotor ball. And the nanostructures are formed by PEI (Polyetherimide) regulated ZnO nanowires growth. After low surface energy material modification, the water contact angle of processed surface was 163° and the sliding angle was less than 4°. The maximum rotational speed was enhanced by up to 82.77% at 1.5 W driving power. Experiments show that the superhydrophobic drag-reduction spherical bearing has good short-term reliability. At 5 V drive voltage, the bearing can extend the rotational speed of ball-disk rotor gyroscope to 35000 rpm, and maintain the normal operation for longer than 40 minutes. This is quite meaningful for short-term-work or one-time-use rotor gyroscopes.
Highlights
After this process, the sample surfaces showed superhydrophobic characteristics
Laser ablation and zinc oxide nanowires growth technologies were introduced into the spherical bearing for drag reduction applications
The same treatment is applied to the spherical bearing of rotor gyroscope, and a good drag reduction effect can be achieved
Summary
The resistance of the bearing is a significant factor affecting the performance of the ball-disk rotor gyroscope. At 5 V drive voltage, the bearing can extend the rotational speed of ball-disk rotor gyroscope to 35000 rpm, and maintain the normal operation for longer than 40 minutes. This is quite meaningful for short-term-work or one-time-use rotor gyroscopes. When the rotational speed is 45000 rpm and the driving power limit is 1.5 W, the spherical bearing with drag-reduction structures can work continuously for about two hours. This processing method can be used in short-term or one-time use devices to enhance their performance
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.