Abstract

Ultrasonic sources are inaudible to humans, and while digital signal processing techniques are available to bring ultrasonic signals into the audible range, there are currently no systems which also simultaneously permit the listener to localise the sources through spatial hearing. Therefore, we describe a method whereby an in-situ listener with normal binaural hearing can localise ultrasonic sources in real-time; opening-up new applications, such as the monitoring of certain forms of wild life in their habitats and man-made systems. In this work, an array of ultrasonic microphones is mounted to headphones, and the spatial parameters of the ultrasonic sound-field are extracted. A pitch-shifted signal is then rendered to the headphones with spatial properties dictated by the estimated parameters. The processing provides the listener with the spatial cues that would normally occur if the acoustic wave produced by the source were to arrive at the listener having already been pitch-shifted. The results show that the localisation accuracy delivered by the proof-of-concept device implemented here is almost as good as with audible sources, as tested both in the laboratory and under conditions in the field.

Highlights

  • Ultrasonic sources are inaudible to humans, and while digital signal processing techniques are available to bring ultrasonic signals into the audible range, there are currently no systems which simultaneously permit the listener to localise the sources through spatial hearing

  • A technique is proposed for real-time listening of temporally isolated ultrasonic sources; intended for subjects with normal binaural hearing

  • The technique relies on the use of a miniature ultrasonic microphone array for two purposes: (1) to analyse the spatial properties of an ultrasonic sound-field depending on time and frequency; and (2) to capture a monophonic signal, which is subsequently transformed into the audible frequency range via pitch-shifting methods

Read more

Summary

Introduction

Ultrasonic sources are inaudible to humans, and while digital signal processing techniques are available to bring ultrasonic signals into the audible range, there are currently no systems which simultaneously permit the listener to localise the sources through spatial hearing. The aim of this study was, to develop a technology to render ultrasonic frequencies audible within the range of human hearing, while simultaneously allowing the directions of the ultrasonic sources to be perceived by the listener in a real acoustic environment. For this task, we propose the use of a miniature head-mounted ultrasonic microphone array, accompanied by parametric spatial audio reproduction of the down-shifted sounds over headphones. Human spatial hearing acts as a signal analyser; estimating the most probable locations of perceived sources This is based on directional cues arising from the acoustical interaction between the listener and the arriving wave front. The directional cues have been found to be the differences between the Scientific Reports | (2021) 11:11608

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call