Abstract
The biomass i.e. wheat–hemlock used in this study was first characterized for its composition. The physical and chemical characterization of biomass was estimated using proximate analysis, calorific value, crystallinity, devolatilization behaviour, ultimate analysis, ICP-MS of ash, FT-IR, XRD, CHNS, and HPLC analysis. For commercial purpose the same biomass was used for conversion to bio-oil by fast pyrolysis process. Therefore, in order to investigate its composition, the bio-oil was also characterized using proximate analysis, calorific value, whereas the chemical composition of the bio-oil was estimated using CHNS, 1H NMR, GC-FID and GC/MS. The bio-oil obtained from wheat–hemlock biomass was supplied by Advanced Biorefinery Co. and after the analysis, its composition has been determined. It contains a mixture of hydrocarbons, pyranoids, furanoids, benzenoids and fatty acids/alcohols with 45% of water, which forms azeotrope with organic polar compounds. The supercritical CO 2 (SC-CO 2) is an advanced method for selective extraction of valuable chemicals from bio-oil without solvent residue. The organic fraction of the bio-oil was isolated by SC-CO 2. It was observed that SC-CO 2 fractions collected at 10 and 25 MPa pressure were enriched with furanoids, pyranoids and bezenoids. Similarly the bio-oil was also fractionated by conventional column chromatographic method and the yields and chemical compositions were compared with fractionated bio-oil obtained using SC-CO 2.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.