Abstract
AbstractThe efficiency of separation of bergamot essential oil, performed by a countercurrent column filled with Raschig rings and using supercritical carbon dioxide as partition solvent, is affected by various parameters. In the experiments explained in this work, the direct effect of CO2 density was shown and the ratio between the amount of oil loaded to on the column and the amount of CO2 used were discussed. The conditions that produced extracts with a similar volatile fraction composition of starting material and with a high yield (more than 80% of recovery) were those with a low feed:solvent ratio; the lowest bergaptene content was obtained at low CO2 density or at high feed:solvent ratio. A good result was observed at a CO2 density of 206 g/dm3 (8 MPa of pressure and a temperature gradient of 46–50–54 °C) and a feed:solvent ratio of 9.4–9.6; in this separation, a yield of 74–77% and a bergaptene content lower than 0.01% was measured. Copyright © 2003 John Wiley & Sons, Ltd.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
