Abstract
In light of the fact that two with good compatibility are better than one, the homo-interpenetrating polymer network (IPN) strategy was used in this work to design novel amidoxime (AOX)-interpenetrating networks into porous silica (PSi) with the final aim to enhance the sorption performances of composite sorbents toward Cs+ and Sr2+. To achieve this goal, first, a homo-IPN of poly(acrylonitrile) (PAN) was constructed inside the channels of two kinds of porous silica, one mesoporous (PSi1) and one macroporous (PSi2), the textural properties of silica being exploited in controlling the sorption performances of the composites. The novel composites were fully characterized by thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and the nitrogen sorption/desorption isotherms (Brunauer-Emmett-Teller (BET) analysis). The sorption properties of the PSi1/AOX and PSi2/AOX composite sorbents for Sr2+ and Cs+ were investigated in the batch mode to determine the effect of solution pH, contact time, initial metal ion concentration, temperature, and the presence of competitive ions on the adsorption performances. The fast kinetics of sorption was supported by the fact that ∼80% of Sr2+ and ∼65% of Cs+ were adsorbed in the first 30 min, the kinetic data being better described by the pseudo-second-order kinetic model. The experimental isotherms were well fitted by the Langmuir and Sips isotherm models. The superadsorption of Sr2+ and Cs+ is demonstrated by the values of the maximum sorption capacity of the best sorbent constructed with mesoporous silica (PSi1/IPN-AOX), which were 344.23 mg Cs+/g and 360.23 mg Sr2+/g. The sorption process was spontaneous and endothermic for both metal ions. The presence of interfering cations (Na+, K+, Ca2+, and Mg2+), at a concentration of 10-2 M, only slightly influenced the sorption capacity for the main cation. The composite sorbents were still highly efficient after five sorption/desorption cycles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.