Abstract
Nanostructured alumina supported copper oxide granular sorbents were prepared by the sol-gel method. The properties of the sol-gel derived sorbents were compared with a similar commercial sorbent which has been used in the pilot scale moving-bed copper oxide process for flue gas treatment. The crushing strength of the sol-gel derived sorbents is about 6–7 times that of the commercial samples, while the attrition rate of the former is at least 3 times smaller. At temperatures below 400 °C, SO2 sorption capacity of the sol-gel derived sorbent is about 3 times that of the commercial sorbent with a similar amount of CuO loading (7–9 wt%). The better mechanical properties and higher sulfation capacity of the sol-gel derived alumina supported copper oxide sorbents are due to their unique microstructure and the coating method for CuO.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
