Abstract

The low intrinsic conductivity of sulfur necessitates conductive additives, such as mesoporous carbons, to the cathode to enable high-performance metal-sulfur batteries. Simultaneous efforts to address polysulfide shuttling have introduced nitrogen-doped carbons to provide both conductivity and suppressed shuttling because of their strong interaction with sulfur. The strength of this interaction willimpact the ability to fill the mesopores with sulfur via melt infusion. Here, we systematically investigate how nitrogen doping influences the rate that molten sulfur can infiltrate the mesopores and the overall extent of pore filling of highly ordered mesoporous doped carbons using in situ small angle X-ray scattering (SAXS). The similarity in electron density between molten sulfur and the soft carbon framework of the mesoporous material leads to a precipitous decrease in the scattered intensity associated with the ordered structure as voids are filled with sulfur. As the nitrogen doping increases from 1 to 20 at. %, the effective diffusivity of sulfur in the mesopores decreases by an order of magnitude (2.7 × 10-8 to 2.3 × 10-9 cm/s). The scattering becomes nearly invariant within 20 min of melt infiltration at 155 °C for all but the most doped carbon, which indicates that submicron-sized mesoporous carbon particles can be filled rapidly. Additionally, the nitrogen doping decreases the sulfur content that can be accommodated within the mesopores from 95% of the mesopores filled without doping to only 64% filled with 20 at. % N as determined by the residual scattering intensity. Sulfur does not crystallize within the mesopores of the nitrogen-doped carbons, which is further indicative of the strong interactions between the nitrogen species and sulfur that can inhibit polysulfide shuttling. In situ SAXS provides insights into the diffusion of sulfur in mesopores and how the surface chemistry of nitrogen-doped carbon appears to significantly hinder the infiltration by sulfur.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call