Abstract

The polyamidoamine derived from N,N′-methylenebisacrylamide (M) and glycine (G), M-G, has been shown to be an effective flame-retardant (FR) for cotton in horizontal flame spread tests (HFST), extinguishing the flame at 5% add-on. Its activity was attributed to its intrinsic intumescence. In vertical flame spread tests (VFST), M-G failed to extinguish the flame even at 30% add-on. Conversely, in VFST, the polyamidoamine derived from M and cystine (C), M-C, inhibited cotton combustion at 16% add-on, but in HFST failed to extinguish the flame below 12% add-on. Its activity was ascribed to the release of sulfur-containing volatiles acting as radical scavengers. In this work, the FR effectiveness of M–Gm–Cn copolymers with different G/C ratio was compared with that of the M–G and M–C homopolymers and of M–G/M–C blends of the same compositions. In HFST, both copolymers and blends extinguished the flame. In particular, M–G50–C50 and (M–G/M–C)50/50 extinguished the flame, even at 7% add-on. In VFST, the copolymers with ≥50% M–C units, similar to M–C, inhibited cotton combustion at 16% add-on. At the same add-on, the M–G/M–C blends failed to extinguish the flame. It may be concluded that, in contrast to blends, copolymers combined the merits of both homopolymers in all tests.

Highlights

  • During the last two decades, the need for safe, flame-retardant finishing systems for cotton has become urgent in both industrial and academic research to explore novel synthetic strategies.Considerable effort has been focused upon enhancing the char-forming efficiency of flame-retardants (FRs) by designing new intumescent systems which are able to create a thermal barrier on fabric surfaces, thereby protecting the polymer bulk [1,2,3,4]

  • This approach has been employed for different polymer matrices such as polyamide 6 [5], poly(ethylene terephthalate) [6], and polypropylene [7] with promising results

  • The thermal stability of PAA homopolymers and copolymers and of PAA-treated fabrics was assessed by thermogravimetric analysis (TGA) in nitrogen and air, from 50 to 800 ◦ C, upon 10 ◦ C min−1 heating rate, employing a TGA/DSC 2 Star® System instrument equipped by Mettler-Toledo (Milano, Italy)

Read more

Summary

Introduction

Considerable effort has been focused upon enhancing the char-forming efficiency of flame-retardants (FRs) by designing new intumescent systems which are able to create a thermal barrier on fabric surfaces, thereby protecting the polymer bulk [1,2,3,4]. This approach has been employed for different polymer matrices such as polyamide 6 [5], poly(ethylene terephthalate) [6], and polypropylene [7] with promising results.

Objectives
Methods
Results
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.