Abstract
Membranes are being increasingly used as an economic alternative for wastewater treatment compared to conventional methods. Ultrafiltration membranes are widely used in metal ions’ rejection. Sulfonated Polyethersulfone (SPES)/polysulfone (PSf) blend flat sheet membranes are prepared using polar solvent N-methyl-2-pyrrolidone (NMP) by the dry–wet phase inversion technique. Polyethylene glycol (PEG-200) is used as a non-solvent additive in the casting solution. The effect of PSf/SPES blend ratio on the morphology, hydrophilicity, water content, porosity, hydraulic resistance, pure water flux, compaction, and molecular weight cut-off (MWCO) of the prepared membranes was studied and found to be improved significantly by the incorporation of SPES in the dope solution. Scanning electron microscopy (SEM) studies revealed that the membranes formed had an asymmetric structure with a thin skin layer and porous sublayer. The prepared membranes were used for rejection of Cu(II) and Zn(II) which are complexed with water-soluble chelating polymer polyethyleneimine. The results show that the order of rejection is Cu(II) ion > Zn(II) ion. Thus, it is worth mentioning that the PSf/SPES blend ultrafiltration membranes prepared in this study would offer immense potential in removal of toxic metal ion from industrial effluents.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
