Abstract
Cross-laminated timber (CLT) CLT is an excellent material for building and high load-bearing structural applications, but its fabrication and use are limited to softwood only. The suitability of aspen (Populus tremula L) wood for manufacturing CLT was assessed by using two adhesives, one-component polyurethane (1C-PUR) and melamine adhesive (ME). Physical properties like water absorption (WA), thickness swelling (TS), delamination, and mechanical properties like bond shear strength, bending modulus of elasticity, bending strength, and rolling shear strength were evaluated to examine its suitability. Compared to ME-bonded CLT, 1C-PUR bonded CLT panels displayed superior physical characteristics, with 70% passing the delamination test. CLT panels bonded with 1C-PUR adhesive also have better mechanical properties than ME-bonded CLT. CLT panels experienced three types of bending failure: rolling shear, delamination, and tension. Aspen CLT has similar or higher mechanical properties than traditional softwoods, making it suitable for CLT manufacturing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have