Abstract
This paper presents a quasi-elliptic filter (QEF) with arbitrary termination impedances (ATI). The proposed QEF is designed by adding cross-coupling between the first and last resonators of an ATI bandpass filter (BPF) with the Chebyshev response. The proposed QEFs with ATI can be designed in even-order resonators and the location of the pair transmission zeros (TZs) is controllable. To prove the validity of the proposed design, the fourth-order QEFs with ATI were implemented on a single-layer substrate-integrated waveguide (SIW) cavity at a center frequency (<i>f</i><sub>0</sub>) of 10 GHz with the pair TZs at 10 ± 1.4 GHz. These SIW QEFs with ATI improve frequency selectivity and effectively suppress the out-of-band signal with high power handling. The measured maximum insertion loss (|<i>S</i><sub>21</sub>|) and minimum return loss (|<i>S</i><sub>11</sub>|) of the SIW QEF with unequal real-to-real ATI are 0.93 dB and 17.4 dB, respectively, in the passband. Similarly, the maximum |<i>S</i><sub>21</sub>| and minimum |S<i>S</i><sub>11</sub>| of the SIW QEF with complex-to-real ATI are 1.2 dB and 18 dB, respectively.yer substrate-integrated waveguide (SIW) cavity at a center frequency (
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Electromagnetic Engineering and Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.