Abstract
Drilling and blasting operations (D&B) are the most difficult and laborious operations in the process of mineral extraction, requiring permanent development and upgrading of methods and equipment. The aim of the study is to substantiate the parameters of drilling and blasting drivage of horizontal and inclined (up to 12o) mine workings on the basis of high-performance self-propelled equipment and new designs of box cuts with cleaning explosive charges (0.2 kg of 6ZhV ammonite), placed in advance holes of 65 to 105 mm in diameter. The paper presents the results of the analysis of practical experience and scientific achievements in the field of drilling-andblasting rupture of solid media and continuum mechanics. The need for new designs of box cuts, reliability of which in the formation of high-quality (clean) cut cavity reaches 0.95-1.00, was substantiated. New design options of box cuts have been developed, the peculiarity of which consists in provision of sufficient compensation (peripheral) volume with the use of blast hole cut charges for blasting rupture of trapezoidal partitions, with the compensation volume factor of 2.50 to 1.34. Promising areas of research were shown using the example of complicated structure ore deposits and large faults in the Kirovograd ore district and crystalline rocks of the Ukrainian shield at the following mines of Ukraine: PJSC KZhRK, CJSC Sukhaya Balka (Kryvyi Rih), Vostok-Ruda LLC, SE VostGOK (Zheltye Vody), CJSC ZZhRK, etc. Promising areas of research were proposed using the example of complicated structure ore deposits typically formed at the junction of large faults; besides, the use of environmentally friendly emulsion explosives and self-propelled emulsion explosive chargers was recommended.
Highlights
– State Enterprise Ukrainian Scientific Research and Design Institute of Industrial Technologies (SE "UkrNIPIIpromtekhnologii"), the city of Zheltye Vody, Ukraine;
Blasting works in urban area A Singapore case study
О. Повышение эффективности проходки подземных горных выработок с использованием шпуровых зарядов с кумулятивным эффектом
Summary
1. Производительность при погрузке и транспортировке горной массы при проходке горных выработок и очистных забоях комплекса машин Boomer 281(282), ST 3,5 2) и комплекса Минибур 1Ф, TORO 151 Техническая характеристика комплексов для проходки горизонтальных и наклонных выработок
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have