Submodule Capacitor Voltage Ripple Reduction of Full-Bridge Submodule-Based MMC (FBSM-MMC) with Non-Sinusoidal Voltage Injection

Abstract

The full-bridge submodule (FBSM)-based modular multilevel converter (FBSM-MMC) offers promising performance due to its ability to output negative FBSM voltage. This paper studies this ability of the FBSM-MMC under zero-sequence voltage injection (ZSVI) and second-order harmonic current injection (SHCI). The focus of the research is to redistribute the FBSM powers by injecting an additional power degree of freedom, resulting in a smaller FBSM capacitor voltage ripple, while keeping the maximum AC output voltage for a given fundamental frequency component of the arm voltage reference. Accordingly, a control strategy was developed, based on non-sinusoidal ZSVI, and SHCI is proposed for further improving the performance of the FBSM-MMC. The proposed non-sinusoidal ZSVI contains a higher sinusoidal third-order harmonic component than that of pure sinusoidal third-order voltage injection (THVI) when operating under the same maximum AC output voltage. By implementing this solution, a smaller amplitude of the injected second-order harmonic current can be achieved, producing a lower power loss in the FBSM-MMC. Considering the proposed solution, the relationship of the arm powers and FBSM capacitor voltages are also discussed. Finally, the simulation results and experimental results are presented to verify the effectiveness of the theoretical analysis of the proposed method.