Submersible surveys of benthos near a turbidity cloud

Abstract

Seabed impacted by settling solids from a turbidity plume can be surveyed by submersible using a ‘bounce’ technique to determine depth of the turbidity front, and hence depth above which benthos observations are practical. The protocol adopted was that after frontal depth was determined by a preliminary dive, the site for the benthic survey was selected. On arrival on the seabed a reconnaisance was made for the observers to agree on the identification of visible benthos. Then 100 × 1 m 2 transects were surveyed using a 1 m 2 quadrat attached to the submersible in view of the port-side observer. At the site investigated, two shallow water stations (depths 13–15 m, and 16–18 m) showing light deposits of mine tailings were seen to support associations of large epifauna and infauna. The first station had an almost single-species stand of the burrowing anenome Pachycerianthus fimbriatus at approximately 100 · 100 m −2, and the second a diverse species association with several starfish and other species at 1–2 · 100 m −2. Burrow holes (up to 3–5 cm diameter) of various sizes indicated that large infaunal species were present. At a deeper station (36–27 m) with heavy tailings and almost no burrow holes, a single Dungeness crab, Cancer magister, and an unidentified shrimp were seen in the 100 m 2 transect. Each dive site was inshore (shallower) from a routinely monitored benthos station shown repeatedly to support a population of small infauna in the tailings. Burrow holes have the potential for determining the identity and abundance of large infaunal species present if an identification system can be developed. The technique of epifaunal and burrow hole surveys (by submersible and scuba diver), combined with infaunal and sediment core surveys and contemporary theory on infaunal succession, provides the potential for a procedure to map the distribution in shallow water of tailings impact and benthic recovery (succession).