Abstract

This paper describes the design and realization of a sub 1-V low power class-AB bulk-driven tunable linear transconductor using a 0.18-μm CMOS technology. The proposed transconductor employs a class-AB bulk-driven differential input voltage follower and a passive resistor to achieve highly linear voltage-to-current conversion. Transconductance tuning is achieved by tuning the differential output current of the core transconductor with gain-adjustable current mirrors. With 10.4-μA current consumption from a 0.8-V single power supply voltage, simulation results show that the proposed transconductor achieves the total harmonic distortion (THD) of <?40 dB for a peak differential input voltage range of 800 mV at frequencies up to 10 kHz. The simulated input-referred noise voltage integrated over 10-kHz bandwidth is 100 μV, resulting to an input signal dynamic range of 75 dB for THD <?40 dB. A biquadratic Gm-C filter is designed to demonstrated the performance of the proposed transconductor. At the nominal 10-kHz cut-off frequency, the filter dissipates 34.4 μW from a 0.8-V supply voltage and it achieves an input signal dynamic range of 67.4 dB for the third-order intermodulation distortion of <?40 dB.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.