Abstract
Purpose: Recently, two new films models, GAFCHROMIC® XR type R and type T films have been developed by ISP, for the measurement of high doseradiation in interventional radiological procedures. The objective of this project is to determine the dosimetriccharacteristics such as linearity, time dependence, sensitivity, energy dependence, dose rate dependence and UV light sensitivity of these new film types. A comparison of dosimetriccharacteristics of these film types with the other commercially available film models is also presented here. Method and Materials: The XR type T, type R and MD‐55‐2 films were exposed to low energy beams from an Oldeft Therapax HF 150T superficial unit and also to high energy beams from a Varian LINAC. The type T films were scanned using a Lumiscan‐50 laser scanner and the type R films were read using a GretagMacbeth D19C reflection densitometer. The optical densities of MD‐55‐2 films were measured with both the scanning techniques for comparison with XR type T and type R films. Results: For low energy beams, the type T and R films were found to be approximately 14 times and 6 times more sensitive than MD‐55‐2 film, respectively. The optical densities of these film types were found to increase by approximately 16% within the first 24 h after exposure and an additional 4% for the next 24 h. No significant changes were found approximately 360 h after the exposure. The energy dependence of the new films for high energies was similar to that of MD‐55‐2, but at low energies these films show a larger variation of optical density compared to MD‐55‐2 film. An insignificant effect of UV light on the sensitivities of the new films was observed. Conclusion: The dosimetriccharacteristics of the news films were evaluated and also compared to the other commercially available film models.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.