Studying the load of composite brake pads under high-temperature impact from the rolling surface of wheels

Abstract

The object of the research is the processes of thermal stress, perception and redistribution of loads by the brake composite pad during braking of the car in operation. In the current conditions, wedge-dual wear of composite brake pads is observed in the braking systems of freight cars, the feature of which is the deterioration of the braking efficiency of freight trains. With this type of wear, both an increase in the load on the brake pad and an "underuse" of the amount of pressure on it can occur. A comprehensive thermal calculation was carried out for composite brake pads with uniform and wedge-dual wear. The results of the calculation showed that the amount of pressure on an abnormally worn pad is 23.3 % less than that acting on a pad with nominal values. It has been proven that the change in the pressure force on the composite pad with different values of the wear parameters during braking leads to a change in the braking force that occurs between the wheel and the rail during braking. The calculation of the strength of the composite brake pad with wedge-dual wear was carried out. The obtained results will make it possible to develop measures to modernize the elements of the brake lever transmission of freight cars. The field of practical use of the obtained results is car-building enterprises. The conditions for the practical use of the results are the brake lever transmissions of carriages of cars with a gauge of 1520 mm. The conducted studies prove the negative impact of wedge-dual wear not only on braking efficiency, but also on the strength of brake pads. This makes it necessary to create measures aimed at its elimination, which will contribute to increasing the level of train traffic safety and significantly reducing the operational costs of maintaining freight cars