Abstract

BackgroundNon-Newtonian fluids occur in many relevant flow and mixing scenarios at the lab and industrial scale. The addition of acid or basic solutions to a non-Newtonian fluid is not an infrequent operation, particularly in Biotechnology applications where the pH of Non-Newtonian culture broths is usually regulated using this strategy.Methodology and FindingsWe conducted mixing experiments in agitated vessels using Non-Newtonian blue maize flour suspensions. Acid or basic pulses were injected to reveal mixing patterns and flow structures and to follow their time evolution. No foreign pH indicator was used as blue maize flours naturally contain anthocyanins that act as a native, wide spectrum, pH indicator. We describe a novel method to quantitate mixedness and mixing evolution through Dynamic Color Analysis (DCA) in this system. Color readings corresponding to different times and locations within the mixing vessel were taken with a digital camera (or a colorimeter) and translated to the CIELab scale of colors. We use distances in the Lab space, a 3D color space, between a particular mixing state and the final mixing point to characterize segregation/mixing in the system.Conclusion and RelevanceBlue maize suspensions represent an adequate and flexible model to study mixing (and fluid mechanics in general) in Non-Newtonian suspensions using acid/base tracer injections. Simple strategies based on the evaluation of color distances in the CIELab space (or other scales such as HSB) can be adapted to characterize mixedness and mixing evolution in experiments using blue maize suspensions.

Highlights

  • Mixing is one of the most common unit operations in the chemical engineering practice

  • One specific scenario is the mixing of heavy suspensions, an operation that occurs in diverse lab and industrial scale settings in many applications related to food technology [1,2,3], polymer processing [4,5], and biotechnology [6,7,8,9], among others

  • We propose the use of blue maize suspensions as a model to study mixing in Non-Newtonian suspensions

Read more

Summary

Introduction

Mixing is one of the most common unit operations in the chemical engineering practice. One specific scenario is the mixing of heavy suspensions (suspensions where the concentration of solids is higher than 5% w/w), an operation that occurs in diverse lab and industrial scale settings in many applications related to food technology [1,2,3], polymer processing [4,5], and biotechnology [6,7,8,9], among others In many of these experimentally relevant suspensions, NonNewtonian behavior is observed [6,7,8,9,10,11]. The addition of acid or basic solutions to a non-Newtonian fluid is not an infrequent operation, in Biotechnology applications where the pH of Non-Newtonian culture broths is usually regulated using this strategy

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call