Studying and Analyzing the Seismic Performance of Concrete Moment-Resisting Frame Buildings

Abstract

Nowadays, due to environmental changes, the condition of buildings can be in danger. In order to protect the performance of existing buildings, it is important to investigate the seismic behaviour of building structure subjected to earthquake excitation. In addition, it is important to study the advanced level of ductile design recommended by current codes. In the immediate future, lateral load resistance needs to be evaluated precisely. For the purpose of analyzing the seismic responses of reinforced concrete (RC) buildings in this project, 6- and 12-story frames of representative buildings are modeled in this research paper. The response spectrum analysis is deployed for a multi-degree-of-freedom system exposed to seismic waves (earthquake) in the City of Vancouver. Hence, the seismic nature of Vancouver City is emulated by the resulting response spectra using ground motion records (GMR). Ultimately, for concluding the average displacement as well as the base shear of the structures, a time-history analysis is investigated. In this regard, the SAP2000 and ETABS software are utilized for analyzing seismic performances. In addition, a comparison is presented between previous studies that used the IDARC2D software and the proposed results that used the ETABS software. It is found that the applied cases are not overlapping the limit of the NBCC 2015 Code. Consequently, after investigation, it is evident that the 3D software is much more accurate than the 2D software.