Abstract
In this paper, the influence of paraffinic oil on the physical mechanical, thermal and adhesion properties of three blends of EPDM Buna EP T.6465, Keltan 5260Q and Keltan 6160 D and CIIR have been investigated. The results showed that the tensile strength values and elongation at break of keltan 5260Q/CIIR and keltan 6160 D/CIIR with 10 wt.% paraffinic oil represent the improvement of 57.8%, 57.6% and 71% to 81% respectively, compared with one without oil. The mean peel force of EPDM keltan 6260D with 10% oil loaded is about 36% and 32.5% higher than that of EPDM keltan 5260Q and EP.T 6465 blends respectively. With suitable oil content, in this case is 10% wt., the thermal resistance of keltan 5260 Q and 6160D seems to be higher than that of without processing oil and suitable for thermal resistance rubber application.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
