Abstract
Silver nanoparticles in this study were prepared using the method of laser ablation in liquids (PLAL) at two energies (540 and 700) mJ and the count of pulses were (100,200,300 and 400) pulse . The prepared samples were divided into three groups: the first group of the samples were kept as they are without any irradiation but the second and third group were irradiated by Co-60 source with two amount of doses (7.5 and 11) KGy respectively . A series of measurements and studies were done, and from the pictures of Transmitted Electron Microscope (TEM) , it was observed that the prepared nanoparticles at laser energy (540) mJ with pulses count (400) pulse were spherical but the prepared nanoparticles at laser (700) mJ with pulses cont (400) pulse were nano rods shape. The gamma irradiation effect was studied through its effect on the optical properties of the nanoparticles at different preparation conditions , represented by a change in the pulses and the energy of the laser used. The results showed that there was an increase the absorbance peaks when increasing the irradiated dose. The (TEM) image showed we get spherical nanoparticles in shape and nano composition. The average diameter of the prepared silver nanoparticles at (540) mJ laser energy in the range of (30-40) nm.
Highlights
دراسة تأثير أشعة كاما على الخصائص البصرية لجسيمات الفضة النانوية المحضرة بتقنية الاستئصال بالليزر (PLAL) النبضي في السوائل
The results showed that there was an increase the absorbance peaks when increasing the irradiated dose
الاستنتاج تم في هذه الدراسة الحصول على اهم الاستنتاجات التالية: .1نجاح طريقة الاستئصال بالليزر النبضي في السائل للحصول على جسيمات الفضة النانوية وباحجام مختلفة ،حيث إذ أن التحول اللوني لهذا المحلول هو مؤشر على تكوين محلول غروي يحتوي على جسيمات معدنية من المعادن المستخدمة. .2يمكن التحكم في حجم الجسيمات وحجم توزيعها بواسطة معلمات الليزر (عدد النبضات والطاقة) ومن خلال الوسط السائل
Summary
دراسة تأثير أشعة كاما على الخصائص البصرية لجسيمات الفضة النانوية المحضرة بتقنية الاستئصال بالليزر (PLAL) النبضي في السوائل.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.