Abstract
Aiming at the problem that TC4 titanium alloy panel parts after welding have large internal residual stress and obvious panel deformation, which can’t meet the requirements of the parts, the viscoelastic plastic model of titanium alloy panel parts is established by finite element analysis, and the welding deformation-thermal alignment collaborative simulation environment is established by ANSYS, and the welding deformation and thermal alignment process are analyzed by numerical simulation. The law of shape correction when the correction temperature is 600 °C, 650 °C, 700 °C and the holding time is 3600s, 5400s and 7200s, respectively, and the calculation formula of springback rate is established to evaluate the effect of thermal shape correction, so as to optimize the heat treatment correction process. The results show that the correction temperature and holding time have obvious influence on the correction effect. When the correction temperature is 700 °C and holding time is 7200s, the correction effect is the best, and the springback rate is controlled below 25%, which meets the requirements of machining accuracy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.