Abstract
Experiments have been performed on turbulent channel flow with injection through an inclined slit. The inclined angle is fixed to 30 degrees at the main stream velocity 10 m/s. The dimensionless injection flow ratio is varied eight steps in ranging 0.067-0.467. The cooling effectiveness, wall static pressure, wall shear stress, velocity profile and turbulent intensity are measured behind the slit. In addition, the temperature distribution is measured. The cooling effectiveness and pressure loss increases with increasing the injection flow ratio. When the injection flow ratio is 0.433, the highest cooling effectiveness is obtained. Turbulent intensity and Reynolds shear stress near the slit show the high peak in the near-wall region. However, this peak rapidly decays in the downstream direction. This phenomenon relates to improvement in the cooling effectiveness.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
