Abstract
FeS solid lubrication duplex layer was prepared on the surface of 45 steel by ion nitrocarburizing and ion sulphurizing process. The sulphide grains in micron and nano scale and holes distributing equably on the duplex layer. The duplex layer is composed of FeS, FeS2 and Fe3N. Under liquid paraffin oil with 0.2wt%n-Fe3O4 lubricating, the synergistic effect between n-Fe3O4 and the duplex layer is produced, and the chemical reaction films including sulphide, sulphate and nitride is formed, which makes the friction factor of the duplex layer keep being the lowest and about 0.075, and the volume loss is reduced by 91% than that of the plain surface, and reduced by 89% and 21% than that of the sulphurized surface and the nitrocarburized surface, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.