Abstract
In this study, three polyurethane systems A (A450/RD181/L75), B(A450/RD181/N3390) and C(A450/RD181/2104/N3390) for in-mould decoration ink were studied. The results of thermogravimetric analysis showed that introducing rosin modified phenolic resin 2104 (RMPR) and N3390 into PU system A can improve the thermal stability, Moreover, Measurements of gel fraction and swell ratio showed that incorporation of N3390 is benificial for increasing the cross-linking density of PU systems as compared to L75 so as to increase the gel fraction and decrease the swell ratio.The tensile strength of cured PU systems increased following in the order: A<B<C, elongation at break is just the opposite. In addition, it is indicated that incorporation of N3390 is benificial for increasing the cross-linking density of PUs so as to improve the the shore A hardness and decease the water sorption.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
