Abstract
A parallel three-coil wear particle sensor is innovatively proposed with the detachable substrate and magnetic rings. The magnetic rings are designed and fabricated using polydimethylsiloxane (PDMS) and iron-based amorphous soft magnetic material (IASM). The excitation coils surround the magnetic rings, leaving only a 1mm air gap on the inner side (near the flow channel). The magnetic rings are magnetized under the action of the high-frequency alternating magnetic field, which forms an enhanced magnetic field with a high gradient distribution in the detection area. Through numerical simulation and experimental verification, the influence of IASM concentration, radial position and size of wear particles on the sensor output signal are studied. With the increase of IASM concentration, the sensor detection sensitivity rises dramatically. The sensor with 75% IASM magnetic rings can effectively detect 60 <inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> iron particles and 160 <inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> copper particles in a 10mm flow channel; the detection error rate is less than 15% in the actual lubrication circuit, which fully meets the needs of early abnormal wear fault diagnosis of mechanical equipment. Therefore, this method is a promising candidate for developing the large-flow electromagnetic wear particle sensor sensitivity.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
