Study on the removal effect and mechanism of calcined pyrite powder on Cr(VI)

Abstract

Pyrite exhibits considerable potential as an adsorbent in wastewater treatment. However, few pyrite adsorbents are directly obtained from natural pyrite, as most are composite materials that require a complex preparation process. To develop a pyrite-based adsorbent with a simple preparation process, pyrite was processed by calcination at 400, 600, and 800 °C for 4 h and ball-milled into a fine powder. The adsorption properties of the pyrite powder were systematically explored. The calcined pyrite powder was characterized by SEM-EDS and XRD. The results revealed that the pyrite calcined at 600 °C exhibited excellent adsorption properties and was primarily composed of Fe7S8. The optimum conditions for Cr(VI) removal were a temperature of 45 °C, an adsorbent dosage of 1 g, an equilibration time of 60 min, and an initial pH of 3. Moreover, the calcined pyrite powder exhibited excellent reusability, and the Cr(VI) removal rate exceeded 65% after three cycles. The Cr(VI) adsorption on pyrite can be well described by the Freundlich model and pseudo-second-order kinetic equation. The calcination temperature is the main factor affecting the adsorption performance of pyrite. Therefore, the calcined pyrite powder is expected to be an excellent adsorbent for Cr(VI) in the wastewater treatment industry.