Abstract
Several batch studies that were made up of the acid extraction and the solvent extraction were performed to recover phosphorus from the waste-activated sludge (WAS) incinerator ash. In the acid extraction, the extraction efficiency of phosphorus relied on the acid type, liquid(acid)-to-solid (LacidS) ratio, and acid concentration. Phosphorus in the WAS incinerator ash was completely extracted by 1 M HCl at the LacidS ratio of 6.4:1. Subsequently, the solvent extraction was conducted to separate and concentrate phosphorus further from the acid extract. The efficiency of solvent extraction was affected mainly by the solvent type, liquid (solvent)-to-liquid (the acid extract) (Lsolv Lacid) ratio, and hydrogen ion concentration. Under the appropriate condition, 76% of phosphorus in the acid extract was extracted to 1-butanol phase, which corresponded to 80.1% as the mass fraction of phosphorus to total elements. Prior to the solvent extraction, the addition of bis (2-ethylhexyl) phosphoric acid (D2EHPA), which was available for removing aluminum from the acid extract, led to an additional increase in the term of the mass fraction of phosphorus to total elements. Overall results indicated that phosphorus in the WAS incinerator ash could be efficiently recovered and be a potential renewable resource.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Environmental Science and Health, Part A
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.