Abstract
A grouting material pressure effect simulation device (FSD) was used to study the performance of grout considering grouting pressure, slurry rheology, clay ash, slurry concentration and particle size composition of waste stone powder (FSD influencing factors). After the effect of filter pressing, the alkaline environment of the slurry became stronger, the number of active particles increased, and the CaCO3 and clay crystals were fully agglomerate, and the degree of crystallization increased. The cation exchange capacity increased, and the formation of calcium-silicon-aluminum matrix phase and aluminosilicate aggregates increased. The surface water between the matrix particles supports the crystal layer, and the plastic viscosity and yield stress are reduced. The free calcium oxide decreased, and the consolidation shrinkage rate after slurry hardening was less than 1%. The water-cement ratio is reduced, and the total time for slurry to be poured into the fracture to consolidate and form a mold and intermittent is shortened. The use of waste stone powder and clay in the coal mine grouting industry can not only reduce project costs, but also reduce soil erosion and soil pollution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
