Study on the propagation characteristics of hydrogen/methane/air premixed flames in variable cross-section ducts

Abstract

The flame propagation characteristics of hydrogen/methane/air mixtures with different hydrogen addition ratios (φ=0, 10 %, 20 %, 30 %, 40 % and 50 %) in different variable cross-section ducts were studied. A high-speed camera and pressure sensors were used to collect flame images and determine the overpressure dynamics. The results show that the smooth flame front will be twisted and folded, when the flame propagates to the abrupt position of the cross-section area of the duct. The larger the abrupt change rate of the duct cross-section is, the more obvious the disturbance to the flame and the more severe the turbulence. With increasing hydrogen addition ratio, the flame propagation speed and overpressure in the four kinds of variable cross-section ducts studied increase. The time for the flame front to reach the downstream end is gradually shortened, and the flame propagation time when the flame propagates from the smaller cross-section tube to the larger cross-section tube is more severely shortened with increasing hydrogen addition ratio than that when the flame propagates from the larger cross-section tube to the smaller cross-section tube. The increase of the overpressure caused by the addition of hydrogen is more significant when the flame propagates from the smaller cross-section tube to the larger cross-section tube. When the flame propagates from the smaller cross-section tube to the larger cross-section tube or from the larger cross-section tube to the smaller cross-section tube, the larger the abrupt change rate of the duct cross-section is, the larger the maximum overpressure.