Abstract
The heat pump drying system in cold regions could be prone to frost and resulted in a low heating capacity, high energy consumption, and unstable heat supply. Therefore, this paper, studied four drying modes in terms of energy supply and energy demand, drying time, and the coefficient of performance COP. A synergistic drying modes along with the heat pump drying (HPD) mode were proposed to improve the stability of energy supply and prevent the frost formation, such as, dehumidification and increasing air enthalpy (DEHPD) mode, solar assisted heat pump drying (SAHPD) mode, and a combination of SAHPD and DEHPD mode. The experiments were conducted in Shangri-La, China, which has a low winter temperature and abundant solar radiation to dry 2000 kg of Tibetan medicine “Aucklandiae radix” at a low ambient temperature of 0 °C to −20 °C. Results showed that the DEHPD mode increased the drying chamber temperatures by 25 % and increased the refrigerant enthalpy by 53.79 kJ/kg as well as recovered 78.25 % of the wasted heat compared with the heat pump drying mode HPD. While, the SAHPD mode maintained the heating capacity of heat pump under low ambient temperature similar to that under normal temperatures with a little reduction of 3.27 %. Moreover, the combination of energy supply by DEHPD and SAHPD improved the heat utilization efficiency by 86.60 % and shortened the drying time and energy consumption by 18.55 % and 26.24 %, respectively comparing with the HPD mode. The lowest frost accumulation rate was under the combination mode (SAHPD&DEHPD) and the fastest was under HPD mode. After comparison, the synergistic mode of DEHPD and SAHPD (Mode1) was the optimal drying mode for a continuous full load drying under low temperatures of 0 °C to −20 °C; Mode1 could decrease the drying time by 31.10 % and the energy consumption by 37.99 % with a stable drying performance compared with the HPD mode. Finally, these results optimize the energy supply and demand relationship of heat pump drying systems from the perspective of multi-energy coupling, which provides a valuable reference for the efficient utilization of heat pump and solar energy storage under low temperature conditions.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
