Study on the performance of anodic desulfurization and cathodic denitrification coupled electricity generation in microbial fuel cell

Abstract

Sulfide autotrophic denitrification microbial fuel cell was set up and the two reaction processes of desulfurization in anode chamber and denitrification in cathode chamber were separated to study nitrogen and sulfur removal effect and electricity generation capacity. The results showed that simultaneous desulfurization in anode chamber and nitrate removal in cathode chamber was feasible. The removal load of sulfide and nitrate almost increased with the increase of their concentrations under the experiment operation conditions. Higher sulfide concentration in a certain range was beneficial to generate electricity. The change of nitrate concentration in the cathode chamber had less effect on sulfide removal efficiency and electricity production performance of microbial fuel cell, which was mainly depended on the influent sulfide concentration in the anode chamber. The maximum sulfide and nitrate removal loads were 0.36 kg∙m−3∙d−1 and 0.07 kg∙m−3∙d−1 respectively, with a maximum power density of 144.03 mW∙m−3. The external resistance affected the quantities and varieties of reaction products in the anode chamber and the cathode chamber. Lower external resistance was beneficial to improve the efficiency of nitrate removal in the cathode chamber. The microbial community structure of the anode chamber in sulfide autotrophic denitrification MFC was similar to that of sulfide autotrophic denitrification SBR, whose main functional bacterial genera were Clostridium, Thiobacillus and Rhodobacteraceae. However, the functional bacteria in the cathode chamber were completely different, whose dominant bacteria included Thiobacillus, Bacillus, Flavobacteriaceae, Acinetobacter, Sphingomonas and Paracoccus. The research results provided a new idea and method for the sulfur- and nitrogen-containing wastewater treatment.