Abstract
In this work, we first introduced the high gravity technique in thermochemical method for oil-sludge separation. The effects of different operating conditions on oil content in the treated sludge were investigated. The optimal operating conditions of a reagent component of 5 wt% Na2SiO3 / 2 wt% water soluble demulsifier B1 / 93 wt% H2O, an oil sludge/detergent solution ratio of 1:2, a cycle time of 30 min, a cleaning temperature of 80 °C, a rotating speed of 500 rpm and a settling time of 20 h was obtained. It was found that the oil content in the treated sludge could be reduced to 3.13% after thermochemical treating in a rotating packed bed (RPB) under the optimal conditions, while that in stirring tank reactor (STR) is 5.47%. In addition, the usage of detergent solution in RPB treatment process is 50% less than that in STR treatment process. This work provide a novel higee-thermochemical method for the efficient and continuous treatment of oil sludge.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Chemical Engineering and Processing - Process Intensification
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.