Abstract

The wet chemical etching of silicon using HNO3-rich HF/HNO3 mixtures has been studied. The effect of different parameters on the etch rate of silicon, for example, the HF/HNO3 mixing ratio, the silicon content of the etchant, temperature, and stirring speed in these solutions, has been examined and discussed in light of a previous study on etching in HF-rich HF/HNO3 mixtures. Nitrogen(III) intermediates are generated owing to the dissolution of silicon and the decomposition if the solution is exposed to air. The nitrite ion concentration, measured in diluted etchant solution by ion chromatography, acts as a sum parameter for the reactive N(III) species in the concentrated etchant. The etch rate shows two different correlations to the nitrite concentration. In the region of high nitrite concentrations, the etch rate decreases slightly with decreasing nitrite concentration, whereas at lower nitrite concentrations, the etch rate increases linearly with further decreasing nitrite concentration. Stirring exper...

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call