Study on the improved accuracy of strip profile using numerical formula model in continuous cold rolling with 6-high mill

Abstract

The quality requirements for thickness accuracy in cold rolling continue to become more stringent. In cold rolling mill, it is very important that the rolling force calculation considers rolling conditions. The rolled strip thickness was predicted using calculated rolling force. However, the prediction of strip thickness in cold rolling is very difficult; in particular, for 6-high mill with shifted intermediate roll (IMR), the accuracy of thickness is not good. In this study, to improve the accuracy of rolled strip thickness, the roll gap flattening can be given based on Hertz contact theory, with contact between rolls and the smooth cylindrical rolls for the rolling elastic deformation. Also, the distribution of the roll gap flattening may be calculated using the contact force of unit transverse length. The strip profile at the continuous cold rolling is calculated by using the numerical analysis model considering the initial strip profile before cold rolling. Hence, we propose that the numerical model can predict the rolled strip profile more quickly and accurately and be applicable to the field. The results of the proposed numerical model were verified by FE-simulation and cold rolling experiments of 6-high mill with five stands.