Study on the heat treatment of multispectral ZnS for residual stress reduction

Abstract

Multispectral ZnS (M − ZnS) will inevitably introduce stresses during the chemical vapor deposition (CVD) polycrystalline growth and hot isostatic pressing (HIPping) stages. In this paper, the generation mechanism and elimination method of residual stresses in M − ZnS are analyzed by means of SEM, transmittance, XRD analysis and mechanical property characterization, and the effects of heat treatment temperature, time and material annealing structure on the apparent morphology, optical and mechanical properties of M − ZnS materials are investigated. The results show that the internal stresses of M − ZnS mainly originate from the CVD ZnS growth and HIPping stages, and the most effective method to reduce the stresses is heat treatment. The key factors affecting the effect of heat treatment include temperature, time, and annealing structure. Selecting a GZ(G) annealing structure combined with a suitable cooling rate for heat treatment of M − ZnS materials will significantly improve the heat treatment effect. More annealing time has a significant effect on the transmittance in the 0.38–3 μm band, and insignificant effect on the transmittance in the 3–5 μm and 8–10 μm bands. Heat treatment will bring some degree of structural changes to the material, often manifested including a trace of hexagonal phase structure, which will affect the optical imaging quality of the window material. Heat treatment contributes to secondary grain growth, with an increase in grain size and a decrease in grain boundaries. Excessive heat treatment accelerates the loss of hardness and bending strength, and also leads to the generation of micro-cracks and macro-cracks in the material, reducing the mechanical properties of the material. Heat treatment holding 200 h and 100 h compared to the unannealed, Vickers hardness decreased by 13.518 and 7.96, respectively, bending strength decreased by 4.77 MPa and 1.73 MPa, respectively. Therefore, in actual production, should not be selected excessive heat treatment time.