Abstract

An experimental study aimed at investigating the extension of lean operation limit through hydrogen addition in a SI engine was conducted on a six-cylinder throttle body injection natural gas engine. Four levels of hydrogen enhancement were used for comparison purposes: 0%, 10%, 30% and 50% by volume. The effects of various engine operating conditions on engine's lean burn capability were also examined. Test results were then analyzed from a combustion point of view. The results show that engine's lean operation limit could be extended through adding hydrogen and increasing load level (intake manifold pressure). Effect of engine speed on lean operation limit is smaller. At low load level increase in engine speed is beneficial to extending lean operation limit but this is not true at high load level. The effects of engine speed are even weaker when the engine is switched to hydrogen enriched fuelling. Spark timing also influences on lean operation limit and both over-retarded and over-advanced spark timing are not advisable. It is also observed there existed a limiting value imposed on spark-90% MFB burn duration if lean operation limit is not to be exceeded and interestingly, this limiting value was independent on hydrogen enhancement level and engine operating conditions examined in this study.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call