Abstract
Texture analysis of pilgered zirconium alloy tube was carried by neutron diffraction to study the effect of texture on the corrosion behaviour of the tube. The specimens were selected with similar grain sizes and shapes, but different crystallographic textures. Corrosion potential and rate of the zirconium alloy in deaerated 40% HCl+500 ppm FeCl 3 at 20 °C are about −12 mV SCE and 5.0×10 −4 A cm −2, respectively. Texture analysis by neutron diffraction showed that the change of the corrosion resistance was mainly related to crystallographic texture of the pilgered zirconium alloy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.